Product features 

● Accuracy: ±0.1% calibration range; 

● Stability: 6 months, ±0.1%URL; 

● Measuring range: Differential pressure: 0-1.3～6890KPa, static pressure: 4, 10 and 14MPal; 

● Effect of ambient temperature: ±(0.2%URL+0.18% calibration range)/56℃; 

● Zero error: ±0.5%URL/56℃; 

● Zero: ±0.2%URL under 13790kPa based on the measuring range: 4 to 8; ±0.25%URL based on other measuring range. The zero error can be corrected by online rezeroing; 

● Measuring range: It can be corrected to ±0.25% output reading: /6895kPa. As for measuring range 3, it can be corrected to ±0.5% output reading /6895kPa; 

● Influence of vibration: The vibration effect under 200Hz in any axial direction is ±0.05%URL/g 

● Electromagnetic interference/radio-frequency interference (EMI/RFI effect): 20 to 1000MHz. When the field intensity reaches to 30V/M, the measuring range with drift being less than ±0.1% will be output; 

● Mounting position influence: The zero drift is no more than ±0.25kPa. All zero drift can be corrected; No effect on the measuring range; 

● Zero and measuring range: Adjustment with local range and zero button or remote adjustment with HART manual actuator; 

● Simulation and lineation: The measuring range and zero are continuously adjustable 

●Zero positive and negative transfer: At the moment of zero negative transfer, the lower limit of measuring range must be more than or equal to -URL; At the moment of zero positive transfer, the upper limit of measuring range must be less than or equal to +URL. The calibration range is no less than the minimum measuring range; 

● Output: 4～20mA DC. The user can choose linear or square root output. The digital process variables are superimposed on 4 ~ 20mA DC signal and can be used for the upper computer with HART protocol used. 

Product model selection