Product overview 

The LMR intelligent magnetostrictive liquid level meter is a high-precision liquid level measuring instrument. The instrument works normally with large measuring range, multiple installation modes, quick commissioning and extremely high cost performance. 

Product parameters 

● Repeatability: Better than ±0.002%FS; 

● Output temperature: 50ppm/℃; 

● Product power consumption: ≤50mA; 

● Output ripple: ≤20mV; 

● Dead zone: Soft rod: Upper dead zone: 100mm, lower dead zone: 300mm; 

● With load capacity: 4～20mA output: With load capacity≤500Ω; 

●0～5V and 0～10V output: * Small controller load≥5kΩ; 

● Measuring bar material: 0Cr18Ni9, 1Cr18Ni9Ti or user's specific customization; 

● Electronic storehouse enclosure material: 1Cr18Ni9Ti; 

● Floating ball material: 0Cr18Ni9, 316 and nitrile rubber; 

● Anti-explosion type: ExdⅡBT5, ExiaⅡBT5 and ExdⅡCT5 

● Protection grade: IP65 

● Measuring range: Hard rod: 150mm～4000m m, soft rod: * Length: 20000mm; 

● Output form: 4～20mA, 0～5V, 0～10V, ±5V, ±10V and RS-485; 

● Linearity error: Better than ±0.05%FS; Sensor with measuring range being less than 300mm and error: less than 150μm; 

● Hard rod: Upper dead zone: 51mm, lower dead zone: 36mm, with black line mark;  (appropriate change as per use requirements) 

● Installation form: Screw installation, connector installation, locating ring installation, hanging installation or user's special customization 

● Lead method: Shielded cable connection, default length: 1.5 m (change pursuant to user requirements), aviation plug connection and block terminal connection; 

Product model selection